Articles delegate-en/420-430 of [1-5169] on the server localhost:119
  upper oldest olders older1 this newer1 newers latest
[Top/Up] [oldest] - [Older+chunk] - [Newer+chunk] - [newest + Check]
range 420 - 430   digest:
Accessing internal FTP server from outside...F-
  04/14-21:16 . 0420  "Daniel G. Rodriguez" <> [23]
___ I have recently read a lot about the DeleGate program and have a very basic question. I have a dual-homed gateway which accesses an outside network and an internal private network (
  04/14-21:53 . 0421 (Yutaka Sato) [33]
___ Run a FTP-DeleGate on your gateway host like this: # delegated -P21 SERVER= Then clients can access the internal host ( via the DeleGate on the gateway host (ftp:
WinNT 4.0 with sp4 didn't work with delegate!
  04/14-23:57 . 0422  "Everson Todoroki" <> [53]
___ I'm using version 5.9.1 ... I just don't find any host using any service (pop, http, etc... delegate don't finmd the servers). I'm using a Winnt 4.0 with SP4. There are no conflicting ports. More in
  04/15-00:25 . 0423  "Everson Todoroki" <> [40]
___ Just download 5.9.1 again, and it worked... didyou made any changes to the file since his first publication? If you want, i cand send for you the buggy version thati have... Best Regards
No URL logging
  04/15-03:39 . 0424  Mario Lobo <> [80]
___ <> wrote It is. But it's zero (0) bytes, i.e., no logging is going on. I CHMOD it to "nobody" user and group, and delegate is still not logging. The 8080.http is still zero l
WinNT 4.0 with sp4 didn't work with delegate!
  04/15-08:53 . 0425 (Yutaka Sato) [36]
___ ^^^ If this is exactly what you did, it will cause the situation like follows: Parameter names of DeleGate are case sensitive and unknown parameters are ignored, thus what you did is equal to ``dele
Accessing internal FTP server from outside...F-
  04/15-09:17 . 0426 (Yutaka Sato) [30]
___ I missed to say that you will need to set up wider access permission than default one, if you wish to make the FTP server be open to public, by a parameter like: PERMIT="ftp:*" Cheers, Y
List-based filtering
  04/15-11:16 . 0427 (Yutaka Sato) [50]
___ In existing DeleGate, MOUNT is the parameter which can be used for access control based on patterns of URL path, like this: MOUNT="* /path/of/err.cgi" [the content of
SSL proxy
  04/16-02:40 . 0428  Gary White <> [12]
___ Hi- Two questions. I'm trying to proxy to an https: site inside my firewall using Delegate. Can regular Delegate do this, or is the SSL proxy module required? When I try to configure that one, my co
  04/16-09:44 . 0429 (Yutaka Sato) [27]
___ You can transparently relay a TCP connection by "tcprelay" DeleGate for any protocol without interpreting what is exchanged on the connection. In your case a tcprelay-DeleGate like folllows on your
How to filter based on separate server names?
  04/16-14:49 . 0430  "Simon Bennett" <> [28]
___ How do I set up a number of filters to perform different actions based on the server names. I can set up CMAP entries on the command line like: CMAP=/opt/dgate/oze.cfi:FTOCL:http:**
  admin search upper oldest olders older1 this newer1 newers latest
[Top/Up] [oldest] - [Older+chunk] - [Newer+chunk] - [newest + Check]
Generated:02/18 03:54:09 (1 sec) Expires:02/18 09:54:08 @_@V