Articles delegate-en/3744-3788 of [1-5169] on the server localhost:119
  upper oldest olders older1 this newer1 newers latest
search
[Top/Up] [oldest] - [Older+chunk] - [Newer+chunk] - [newest + Check]
range 3744 - 3788   digest:
passing original url as parameter for redirected webpage
  06/01-06:52 . 3744  "Robert van Leiden" <ptyhabdyi-qaobhluxi7tr.ml@ml.delegate.org> [13]
  Thank you very much for this feedback Yutaka! I want to test this setup (is adding STLS=mitm the only required change for my code?), but I'm having a lot of trouble compiling the adapted 9.6.0 sourc
  06/01-10:01 . 3745  feedback@delegate.org (Yutaka Sato) [24]
  Hi, Sorry, I could not imagine that you are an user of Windows :) Indeed the source code release is not complete for Windows, so I uploaded the patched binary as ftp://ftp.delegate.org/pub/DeleGate/
relaying with single process
  06/01-23:23 . 3746  prqhabdyi-qaobhluxi7tr.ml@ml.delegate.org [10]
  Hello, is it possible to use delegate to act as reverse proxy to many server with only one single process (command line), like reversing to ftp, http, etc. server without having to run multiple dele
passing original url as parameter for redirected webpage
  06/02-05:47 . 3747  "Robert van Leiden" <ptyhabdyi-qaobhluxi7tr.ml@ml.delegate.org> [58]
  Hi, yes, when it comes to doing special things on this level Windows is not the most ideal platform. I've tested the new binary with the mitm parameter and it works great. However... Unfortunately t
  06/02-11:19 . 3748  feedback@delegate.org (Yutaka Sato) [71]
  Hi, Of course. Any trial to peep the content of the communication encrypted by SSL MUST be detected by the client as the Man-In-The-Middle attack (MITM). Otherwise we can trust SSL to be secure. I d
relaying with single process
  06/02-14:10 . 3749  feedback@delegate.org (Yutaka Sato) [17]
  It can be as follows: delegated -P21,80 SERVER=ftp://ftpserv:-:-P21 SERVER=http://wwwserv:-:-P80 or you can use the INETD parameter. Cheers, Yutaka 9 9 Yutaka Sato <y.sato@delegate.org> http://deleg
ftp sftp get problem
  06/04-22:16 . 3750  "Nuellmann, Thorsten" <puyhabdyi-qaobhluxi7tr.ml@ml.delegate.org> [85]
  Hi, I have a delegate server running and try to use the ftp/sftp gateway. It works, I can put files bigger 500MB no problem Now I will get files from sftp server, I can only get files less 32786, wh
compile problems
  06/07-05:14 . 3751  Derrick J Chacko <pu4habdyi-qaobhluxi7tr.ml@ml.delegate.org> [584]
  Hi, I am attempting to compile delegate from source on a HPUX11.11 PA-RISC machine. We are operating in a IPv4 environment and I believe this may be the problem. I am not sure how to disable the IPv
ftp sftp get problem
  06/07-12:55 . 3752  feedback@delegate.org (Yutaka Sato) [53]
  Hi, The current (tentative) SFTP/FTP gateway of DeleGate is implemented based on the "sftp" command so the behavior of it depends on the implementation and specification of the sftp command and the
compile problems
  06/07-13:29 . 3753  feedback@delegate.org (Yutaka Sato) [118]
  Hmm... I coded the automatic detection of the IPv6 incapablity in the file "include/vsocket.h" based on the absense of definition of "AF_INET6" or "IPPROTO_IPV6" but your environment seems to have b
ftp sftp get problem
  06/07-23:03 . 3754  feedback@delegate.org (Yutaka Sato) [115]
  Hi, I uploaded DeleGate/9.6.1-pre6 (which is expected to be 9.6.1 soon) including the patch, but I found it was not enough for large files which takes longer than 10 seconds to transfer it. I'll fix
  06/08-02:25 . 3755  "Nuellmann, Thorsten" <puyhabdyi-qaobhluxi7tr.ml@ml.delegate.org> [147]
  Hi Yutaka, Thanks a lot for your activities I will try it with this release THX Thorsten ---Original Message--- From: Yutaka Sato [mailto:feedback@delegate.org] Sent: Donnerstag, 7. Juni 2007 16:04
DeleGate/9.6.1 (BETA) -- minor fixes
  06/08-21:22 . 3756  feedback@delegate.org (Yutaka Sato) [67]
  Dear DeleGate users, I inform you of the new release of DeleGate available as follows: DeleGate/9.6.1 (BETA) -- minor fixes This release includes many minor fixes. * Fix for SEGV on Windows with mul
ftp sftp get problem
  06/15-19:34 . 3757  "Nuellmann, Thorsten" <puyhabdyi-qaobhluxi7tr.ml@ml.delegate.org> [144]
  Hi Yutaka, Thanks for your help the new one works fine. Thx Thorsten ---Original Message--- From: Yutaka Sato [mailto:feedback@delegate.org] Sent: Donnerstag, 7. Juni 2007 16:04 To: feedback@delegat
minimum neccessary libs
  06/16-05:52 . 3758  "Joe Moore" <pvyhabdyi-qaobhluxi7tr.ml@ml.delegate.org> [151]
  I have successfully built and run delegated on FreeBSD 6.2-stable. I built from the ports collection and it runs on a "typical" FreeBSD install. I am now trying to get it to run in a "minibsd 6" ins
  06/16-08:25 . 3759  feedback@delegate.org (Yutaka Sato) [33]
  You should be able to do it with the ldd command if it is not stripped. % ldd delegated delegated: libutil.so.5 => /lib/libutil.so.5 (0x8008ad000) libpthread.so.2 => /usr/lib/libpthread.so.2 (0x8009
ftp sftp get problem
  06/18-16:23 . 3760  feedback@delegate.org (Yutaka Sato) [84]
  Hi, On what OS are you using DeleGate? I think you are lucky if you see it works without a problem on your machine. I tested gateways of {HTTP,HTTPS,FTP,FTPS} toward sftp on different platforms incl
  06/18-16:32 . 3761  "Nuellmann, Thorsten" <puyhabdyi-qaobhluxi7tr.ml@ml.delegate.org> [108]
  Debian sarge ---Original Message--- From: Yutaka Sato [mailto:feedback@delegate.org] Sent: Montag, 18. Juni 2007 09:24 To: feedback@delegate.org Cc: Nuellmann, Thorsten; feedback@delegate.org Subjec
minimum neccessary libs
  06/18-16:44 . 3762  feedback@delegate.org (Yutaka Sato) [31]
  Hi, By the way, could you tell me the easiest way to run minibsd on a virtual machine server? I have VirtualPC, Parallels Desktop and VMWare thus if there is an ISO image of a minibsd it'll so easy
ftp sftp get problem
  06/18-16:58 . 3763  feedback@delegate.org (Yutaka Sato) [41]
  Hmm... I have Debian 3.1 on VMWare with sftp dated Nov. 2004: -rwxr-xr-x 1 root root 61164 2004-11-29 00:33 /usr/bin/sftp It seems that the version does not have the problem of "ECHO" but has the pr
minimum neccessary libs
  06/19-02:41 . 3764  "Joe Moore" <pvyhabdyi-qaobhluxi7tr.ml@ml.delegate.org> [70]
  Yutaka, I am not aware of any minibsd images for vmware, but I haven't really looked very hard for them either. I am using a FreeBSD install on vmware workstation to produce image files that can be
  06/19-03:28 . 3765  feedback@delegate.org (Yutaka Sato) [28]
  Joe, Thank you for your offer. I have several free USB disks including 32MB flash and 4GB/8GB HDD. Can I use them for VMware, on Windows ? Cheers, Yutaka 9 9 Yutaka Sato <y.sato@delegate.org> http:/
  06/19-03:43 . 3766  "Joe Moore" <pvyhabdyi-qaobhluxi7tr.ml@ml.delegate.org> [59]
  Yutaka, VMware workstation 6 (for windows) fully supports USB 2.0 in VMs. I believe workstation version 5 supports USB 1.0. Neither will support USB at all if you enable the "ESX server" compatibili
  06/19-05:52 . 3767  feedback@delegate.org (Yutaka Sato) [29]
  Joe, Since I'm doing my development mainly on MacOSX, I'm waiting the release of the product version of VMWare on MacOSX. So I'm just using "VMWare Server" on Windows for a while. It seems that it d
  06/19-06:32 . 3768  "Joe Moore" <pvyhabdyi-qaobhluxi7tr.ml@ml.delegate.org> [78]
  Yutaka, You are correct. The VMware "BIOS" will not boot from a USB device. You could however write a bootable image to a USB flash drive from a VM and then boot any PC that supports USB boot device
  06/19-07:18 . 3769  feedback@delegate.org (Yutaka Sato) [58]
  Joe, You mean that it is not used to boot a VM but a real machine? Possiblly I'll understand what you mean in future :) I think such image will be useful to demonstrate what is minibsd ... You can s
  06/20-00:34 . 3770  "Joe Moore" <pvyhabdyi-qaobhluxi7tr.ml@ml.delegate.org> [50]
  ---Original Message--- From: Yutaka Sato [mailto:feedback@delegate.org] Sent: Monday, June 18, 2007 5:18 PM To: feedback@delegate.org Cc: Joe Moore; feedback@delegate.org Subject: Re: [DeleGate-En:3
  06/20-02:26 . 3771  feedback@delegate.org (Yutaka Sato) [40]
  Joe, The simplest way will be putting the PEM files at the same directory where the executable of DeleGate is placed (i.e. EXECDIR which is one of directories listed in LIBPATH). Another way is impl
DeleGate/9.6.2 (BETA) -- minor fixes for FreeBSD, sftp/FTP gw., POP/HTTP gw.
  06/20-21:59 . 3772  feedback@delegate.org (Yutaka Sato) [54]
  Dear DeleGate users, I inform you of the new release of DeleGate available as follows: DeleGate/9.6.2 (BETA) -- minor fixes for FreeBSD, sftp/FTP gw., POP/HTTP gw. This release includes minor fixes
MiniBSD VM with delegate - - was [DeleGate-En:3771] minimum neccessary libs
  06/23-00:00 . 3773  "Joe Moore" <pvyhabdyi-qaobhluxi7tr.ml@ml.delegate.org> [21]
  Yutaka, I built a VM of MiniBSD with delegate for you. It's on my ftp server at 209.98.45.210. You'll need to login: Username = ysato Password = delegate The password for the root account on the vm
Can I force ssl version 3.0 only?
  06/23-02:35 . 3774  "Joe Moore" <pvyhabdyi-qaobhluxi7tr.ml@ml.delegate.org> [111]
  I'm using delegated with "STLS=fcl" to encrypt client side communications. My testing shows that there are weak ciphers (keys less than 112 bits) available with ssl 1.0 and 2.0 connections. Is there
MiniBSD VM with delegate - - was [DeleGate-En:3771] minimum neccessary libs
  06/23-10:39 . 3775  feedback@delegate.org (Yutaka Sato) [33]
  Joe, Thank you very much. It worked without problem on my VMWare WS6 (for free evaluation in 30 days :-) but it does not worked on my VMWare Server. Since I'd like to test it for more than 30 days,
Can I force ssl version 3.0 only?
  06/23-10:49 . 3776  feedback@delegate.org (Yutaka Sato) [25]
  Joe, It can be specified as: STLS="fcl,sslway -ssl3" or STLS="fcl,sslway -tls1" Cheers, Yutaka 9 9 Yutaka Sato <y.sato@delegate.org> http://delegate.org/y.sato/ ( ~ ) National Institute of Advanced
Questions about SSLway
  06/25-13:52 . 3777  "Kwis Angelo" <phyhabdyi-qaobhluxi7tr.ml@ml.delegate.org> [98]
  Hi Yutaka, I have ommitted the "-v" option. Now I can see several files in my log directory (port I am using is '8077').. These are the logs: bash-2.05$ ls -lrt total 2270 drwxr-xr-x 2 dutkuser dutk
  06/25-14:20 . 3778  feedback@delegate.org (Yutaka Sato) [44]
  Hi, You can split your log file, day by day for example, into a file named like "DGROOT/log/year-2007/mon-06/day-25/8077" by specifying as this: LOGDIR="log[date+/year-%y/mon-%m/day-%d]" or name it
Can I force ssl version 3.0 only?
  06/26-04:28 . 3779  "Joe Moore" <pvyhabdyi-qaobhluxi7tr.ml@ml.delegate.org> [102]
  Yutaka, I am not able to connect when I force ssl version3 or tls version 1. I have tried with a delegated executable that I compiled as well as with the binary download from ftp.delegate.org. The c
  06/27-00:38 . 3780  feedback@delegate.org (Yutaka Sato) [190]
  Joe, I think this message (from the SSLway process id 605) is not a part of the session logged as follows (with the SSLway process id 613). Running DeleGate with SSLway with "-vd" option instead of
Problem with Content-Encoding
  06/27-20:29 . 3781  "Bieber, Sebastian" <pyuhabdyi-qaobhluxi7tr.ml@ml.delegate.org> [988]
  Hello! After trying for some time to solve the problem on my own without any success, i'd like to ask for your kind help on this matter... For authenticated and encrypted remote access to a local we
Can I force ssl version 3.0 only?
  06/28-00:37 . 3782  "Joe Moore" <pvyhabdyi-qaobhluxi7tr.ml@ml.delegate.org> [207]
  Yutaka, I recompiled with the new sslway.c and ran with the "-vd" option. I can now connect with the config: STLS="fcl,sslway -no_ssl2" -P23 -vd SERVER=telnet://ss922 CACHE=no RES_WAIT=0 The log of
Problem with Content-Encoding
  06/28-01:49 . 3783  feedback@delegate.org (Yutaka Sato) [65]
  Hi, Ooops... It seems that I disabled it in DeleGate/8.6.0 (4 years ago) in which I fixed it to cope with "Accept-Encoding: x-gzip" ... ! 8.6.0 030514 http.c: fixed to echo Accept-Encoding:x-gzip to
Can I force ssl version 3.0 only?
  06/28-02:47 . 3784  feedback@delegate.org (Yutaka Sato) [31]
  Joe, I ment the "-vd" option in TLSCONF as I saw "TSLCONF=-vs" in your configuration in /usr/sbin/delegated.conf in your miniBSD. But it is no more necessary because your problem seems fixed. You ne
Problem with Content-Encoding
  06/28-13:44 . 3785  "Bieber, Sebastian" <pyuhabdyi-qaobhluxi7tr.ml@ml.delegate.org> [131]
  Hi! First, let me say "thanks a lot" for your quick answer. Applying the patch to filter.c solved the problem described - now content is compressed before sent to the client. Unfortunately, with the
  06/28-16:04 . 3786  feedback@delegate.org (Yutaka Sato) [90]
  Hi, Ooooops... Your modification will be enough for most situtaion, but I should fix it as the enclosed patch to cope with "x-gzip" (which might be obsolete) and to prepare to cope with "deflate". C
  06/28-20:16 . 3787  "Bieber, Sebastian" <pyuhabdyi-qaobhluxi7tr.ml@ml.delegate.org> [117]
  Hi, I just applied your patches to the original 9.5.6 version. Don't know if this is of any interest to you, but i can confirm that the patched version works perfecly! Thanks again... So long, Sebas
  06/28-22:25 . 3788  feedback@delegate.org (Yutaka Sato) [34]
  Hi, Maybe you know it is not perfect because it does not apply gzip to the data to which CFIscript is applied. The gzip for HTTP-repsonse is disabled when a FTOCL filter (a filter for the response d
  admin search upper oldest olders older1 this newer1 newers latest
[Top/Up] [oldest] - [Older+chunk] - [Newer+chunk] - [newest + Check]
Generated:12/09 03:06:09 (2 sec) Expires:12/09 09:06:07 @_@V